1. Should I do anything special when I turn off my stove for the summer?
Yes! Follow these steps to get your stove ready for its vacation:
Turn off your stove and unplug it. (You should have a surge protector.) Let it cool completely before you begin the process. Start by cleaning the glass with your heat-safe cleaning solvent and a soft cloth, like you have been doing through the heating season. Do NOT use any cleaning solvent with ammonia in it, because it can damage the glass.
Clean out the entire inside and within the hopper, to the best of your ability. If you have a stove vacuum, this will help make sure everything is removed. (Do NOT use a household vacuum because the fine ash can damage it). Or you can always rely on a trained stove technician to use his or her professional tools.
Read >>Â The 5 Tools You Need to Clean Your Stove Properly
Do NOT leave any wood pellets inside your stove â burned or unburned. Wood pellets are made of kiln-dried, fine wood fibers which will absorb any moisture. If you have moisture inside your stove, the leftover pellets will absorb it and can cause rust to form through the summer, which can create costly damage later. For this same reason, cleaning out all the ports and passages inside your stove is important for your stoveâs health.
If you are unable to safely get inside the inner parts of your stove, and have never done so before, we do not recommend this without professional help. Not only are clean passages a best practice for when your stove is shut down, but also during the burning season as well. Make sure to check your ownerâs manual for any suggestions that might be specific to your brand of pellet stove. For an extra precaution, schedule a summer cleaning/inspection by a trained pellet stove professional technician.Â
Note: Cleancare Professional Cleanings are available through our trusted, certified pellet stove technicians in some regions. Give us a call at 1-800-PELLETS, or enter your zip code on our website to see if Cleancare is available in your area.
2. Do I really need to worry about creosote with my pellet stove?
Your wood burning appliance’s venting system carries out the substances produced when wood burns. As the hot substances flow up into the relatively cooler chimney, condensation occurs, which results in creosote residue sticking to the inner walls of the chimney.
Letting creosote accumulate can cause a house fire – which is (hopefully) common knowledge among wood-burners. Although pellet stoves generate significantly less burn residue due to the clean kiln-dried wood fibers in pellets, itâs still critically important to clean and inspect your stove thoroughly, as you would a firewood-burning system.
Here’s a very helpful guide on how to clean your pellet stove throughout the heating season, and the tools you should have:Â How to Clean Your Wood Pellet Stove in 20 Minutes
3. Why is my flame so weak?
If your flame is weak, or âlazyâ, youâre not experiencing the level of heat you should be getting. If it stays weak for an extended amount of time, your stove will likely just shut down. Causes for a smaller than usual flame are usually a part in need of replacement, incorrect air adjustments, or most common – an uncleaned/neglected pellet stove.Â
Pellet stoves work off of pressurized air, which is drawn from the exhaust. Pet hair, dander, dust and lint are constantly sucked in. If all the passages within your stove haven’t been cleaned out, or your exhaust hasn’t been cleared of debris – air cannot circulate efficiently. Therefore, your flame will not be strong. Aside from occasional tired parts that need replacing, this is more commonly the answer to why you have a weak flame.
4. Should I be burning hardwood or softwood pellets?
Firewood burners prefer to use hardwood in their wood stove or fireplace, because it provides a longer burn compared to softwood due to wood density differences. However, regardless of the type of wood used to produce wood pellets, the pelletizing process produces pellets with the same density. Due to a higher percentage of resin content in softwood, more heat is produced per pound. Therefore, softwood pellets are typically the most popular among pellet stove owners.
5. Why am I getting so much ash?
Check out the specifications on the wood pellets youâre purchasing, and look for the ash content listed. The higher the percentage, the more ash you’ll get, and the more frequent your cleanings will be. Higher quality pellets will have lower ash percentages, and therefore less maintenance.
On top of research, another great way to choose a fuel is by talking to your fellow pellet-burners to see what theyâre using and why. Of course, you wonât know what you like for your home and your budget until you run your own tests. But if youâre buying the cheapest pellets with lower heat and higher ash specifications â you shouldnât expect the same results as the higher quality options available.
Due to a growing trend of pellet stove owners mixing and matching fuel orders to create a strategic burning strategy, we have created a new money-saving bundle – THE POWER PACK! This special 3-ton Cleanfire pack consists of 1 ton of Cleanfire Douglas Fir, and 2 tons of Cleanfire Pacific bundled together for a discounted price.
Why did we add the mix and match feature? Over the years, we have noticed a growing trend of burning pellets with a higher heat output during the coldest months of the heating season, and burning pellets with a lesser heat output (and a typically lower price tag) in the early season and late season months.
For years, there has been a growing shortage of qualified CDLA drivers, and it has only gotten worse over the past year. According to the American Trucking Association, thereâs a shortage of 51,000 truck drivers nationwide, up from 20,000 in 2013 and 36,500 in 2016 with a predicted increase to nearly 100,000 by 2021. As driver supply has dwindled, more trucking companies have turned to intermodal rail, which has even made these containers scarce.
